Electrical HVAC Solar SWMS Pack

Installation of split and ducted air conditioning systems - indoor/outdoor units, refrigerant pipework, drains, electrical connection and commissioning.

Servicing and repair of air conditioning systems, including diagnostics, refrigerant work, component replacement and coil cleaning.

Workshop and field repair of electrical appliances and equipment, including diagnosis, component replacement and testing.

Awareness-level controls for workers who may encounter asbestos-containing materials (ACM) - identifying likely ACM, using the asbestos register, and responding to suspected or disturbed material. This SWMS does not authorise removal.

Hauling and pulling of cables through conduits, ducts, trays and risers using hand and winch methods.

Installation of cable ladder, tray, duct and conduit systems on slabs, walls and suspended supports.

Cutting chases in concrete and masonry for services using wall chasers, saws and breakers.

Entry into and work within confined spaces (pits, tanks, chambers, pipes, vaults) including identification, permits, atmosphere control, entry, the task and rescue.

Construction of cool/freezer rooms - insulated panel walls and ceilings, doors, refrigeration plant and electrical.

Repair and maintenance of cool and freezer rooms - panels, doors, refrigeration and electrical systems.

Installation of HVAC ductwork - suspended runs, risers, plant connections, insulation and duct lifters.

Operation of elevated work platforms (boom lifts, cherrypickers, scissor lifts) for work at height, including set-up, elevated work and stowing.

Disconnection, make-safe and removal of electrical installations during demolition and strip-out works.

New electrical installations in buildings - rough-in, switchboards, cabling, fit-off and verification.

Electrical work in existing and occupied buildings under renovation - alterations, rewiring, board upgrades.

Installation and management of temporary builders' supplies, distribution boards, leads and site lighting.

Excavation in proximity to underground and overhead assets (power, gas, water, sewer, fuel, comms), including locating, potholing, exposing, supporting and reinstating services.

Installation of ground-mounted solar farms - piling, racking, module installation, DC stringing, inverters and HV interface.

Low voltage (230/400V) electrical repairs and installations - circuits, accessories, equipment connections and fault rectification.

Installation and commissioning of mechanical ventilation - fans, AHUs, ductwork connections and controls.

Locating and marking underground services using electromagnetic (EML) and ground-penetrating radar (GPR) methods prior to excavation.

Installation of mechanical services pipework - chilled/heating water, condenser and gas piping, supports, welding/brazing and pressure testing.

Removal and installation of power and utility poles using boring plant and cranes, including network coordination, excavation, standing and termination handover.

Handling, recovery, charging and storage of refrigerant gases including flammable (A2L/A3) and high-pressure refrigerants.

Installation and service of commercial refrigeration systems - compressors, condensers, evaporators, pipework and controls.

Electrical and services work within building risers and shafts - cabling, equipment and penetrations.

Installation of rooftop solar PV - panels, racking, DC wiring, inverters and grid connection.

Installation, replacement and connection of switchboards and distribution boards, including mains work coordination and energisation.

Excavation of trenches for services, drainage and foundations, including service location, excavation, ground support, entry, backfill and reinstatement.

Installation of UV-C disinfection lighting in HVAC ducts, water treatment and surface systems.

Landscaping work in occupied homes - gardens, structures and maintenance with residents on site.

Work within residential and commercial roof spaces - cabling, ducting, equipment and inspections.